SCGX车刀片

SCGX insert angle: 90° Square ,7° Positive Rake Insert with single-sided Chipbreaker；

旋入式嵌件；

High Polish Square Turning Insert for Aluminum Applications;

方形硬质合金刀片；

断屑槽应用：半精加工 & 精加工；

配套车刀刀柄：SSDCN、SSKCR/L；

SCGX Insert can deal with multiple operations by combining different chip breakers and grades;

材质：碳化钨；

SCGX insert specification

SCGX insert is the specialist in external turning. The function of a chip breaker is to improve chip control and to reduce cutting resistance.

A better balance between the two will increase the machining performance.

If chips can be broken into suitable lengths by the chip breaker, they will not wrap around the workpiece, vibration will decrease and tools will not be so easily damaged.

Chip breakers also affect cutting resistance.

Reduced cutting resistance can avoid chipping and fracturing of the cutting edge caused by vibration.

Additionally, lower cutting resistance can decrease the load and heat, and can delay the development of tool wear.

SCGX insert Meaning

Understanding the SCGX Insert Code

小号： 形状: 方形
C：间隙角：7度（正）
G：公差：中等公差为标准，但也可能提供其他精度公差。
X：断屑槽样式 & 孔配置。该字母表示特定的断屑槽几何形状以及刀片是否有孔。
数字：
- 前两位数字： 内切圆 (IC) 直径（以毫米为单位）。要获得近似的英寸当量，请将此数字除以 25.4。
- 接下来的两位数字： 厚度以毫米为单位。除以 25.4 即可转换为英寸。
- 最后两位数字： 圆角半径（以毫米为单位）。要转换为英寸，请除以 25.4。

SCGX insert holder

SCGX Insert Dimensions (ISO)

ISO 名称	内切圆 (IC)	厚度	拐角半径
SCGX 09T302	9.52mm (0.375")	3.18mm (0.125")	0.2mm (0.008")
SCGX 09T304	9.52mm (0.375")	3.18mm (0.125")	0.4mm (0.016")
SCGX 09T308	9.52mm (0.375")	3.18mm (0.125")	0.8mm (0.031")
SCGX 120404	12.7mm (0.5")	4.76mm (0.187")	0.4mm (0.016")
SCGX 120408	12.7mm (0.5")	4.76mm (0.187")	0.8mm (0.031")