CNMG 인서트

Shape：
TNMG: Triangular insert with a 60-degree included angle.
CNMG: Diamond-shaped insert with an 80-degree included angle.

Cutting Edge Strength：
TNMG: Triangular inserts with six cutting edges are very stable and are suitable for roughing and semi-finishing operations.
CNMG：Compared with TNMG insert, it has 8 cutting edges, which is more economical; the top angle of 80 degrees has more stability; it is suitable for roughing and semi-finishing.

1. Shape: CNMG inserts are diamond-shaped indexable cutting tool inserts with an included angle of 80 degrees.

2. Material: They are usually made from tungsten carbide, which is very hard and wear-resistant. CNMG inserts can often have coatings added to enhance their performance, like wear resistance or improved chip flow.

3. Usage: CNMG inserts are used in turning operations on lathes to shape and cut materials like steel, stainless steel, cast iron, and non-ferrous metals.

4. Mounting: The inserts are held securely in a toolholder, providing multiple cutting edges.

CNMG insert geometry :
• C: Diamond shape (80-degree included angle)
• N: Negative rake angle (usually provides a stronger cutting edge)
• M: Medium tolerance class (a general purpose tolerance for fit and precision)
• G: Ground finish (indicates the surface of the insert has been ground for accuracy)

Advantages of CNMG Inserts:
• Strength: The diamond shape and 80-degree angle provide four robust cutting edges, making them great for heavier machining.
• Versatility: They can be used for various turning operations like roughing, semi-finishing, and even some finishing work.
• Cost-effective: Multiple cutting edges per insert improve their lifespan and reduce tooling costs.

Yes, a CNMG 543 insert is thicker than a CNMG 433 insert. Here’s why:

In a CNMG designation, the third digit in the size code represents the insert thickness.

• CNMG 433: The “삼” indicates a thickness of 3/16″.
• CNMG 543: The “5” indicates a thickness of 5/16″.

Therefore, the CNMG 543 is thicker than the CNMG 433.

Let me know if you’d like to compare any other insert thicknesses!

Choosing the best CNMG insert grade for 4340 steel depends on several factors, including:

작업 유형:

• Roughing: Requires an insert grade with high toughness and wear resistance to withstand heavy cutting forces and chip loads.
• Finishing: Prioritizes surface finish, so a harder, finer-grained grade is better. You’ll need to balance this with wear resistance.

Specific 4340 Properties:

• Heat Treatment: Has the 4340 been hardened? Harder 4340 will require even tougher insert grades, possibly with special coatings.

Here are some commonly recommended CNMG insert grades for 4340, along with their strengths:

• General-Purpose Grades:

  • CVD Coated Grades (e.g., PVD TiAlN): Offer good balance of toughness and wear resistance for roughing and semi-finishing.
  • PVD Coated with Alumina (Al2O3) layer: Provides better heat resistance, good for higher speeds in 4340 with moderate hardness.

• Finishing-Focused Grades

  • Fine-Grained Uncoated Grades: For improved surface finish in softer 4340, but wear faster.
  • CBN (Cubic Boron Nitride): Super-hard material for excellent finish on hardened 4340, but more expensive and brittle.

Popular Insert Manufacturers and Grade Examples

• Sandvik Coromant: GC4415, GC4425 (CVD coated grades versatile for 4340)
• Kennametal: KCP25B, KC5010 (good for hardened 4340)
• Walter: WPP10S, WPP20S (general-purpose, good starting point)
• Mitsubishi: UE6110 (uncoated fine grain for finishing)

Important Considerations

• 칩브레이커 스타일: Match the chipbreaker to your operation and the 4340’s hardness to manage chip formation and avoid cutting edge damage.
• Coolant: Proper coolant use is essential, especially for harder 4340 workpieces.

Recommendation:

Start with a versatile CVD-coated grade suitable for your 4340 steel’s hardness. Always consult manufacturer data sheets and machining recommendations for your specific insert grade.

Let me know if you have details on the following, and I can give you a more tailored insert grade recommendation:

• Type of turning operation (roughing, finishing)
• Hardness of your 4340 material
• Any specific surface finish requirements

Yes, a CNMG 543 insert does have a defined thickness. Here’s how to understand it:

In the CNMG designation, the third number in the size code represents the insert’s thickness in sixteenths of an inch.

• CNMG 543: The “5” represents a thickness of 5/16″ of an inch.

Let me know if you’d like to know the thickness of other CNMG inserts or have a specific comparison in mind!