Home / Milling Inserts / ENMU100412 Inserts

Double-Sided Four-Edge High-Feed Inserts

ENMU100412ZER-PH High-Feed Milling Inserts

Q: Which shank cutters are listed?

Seven visible shank-cutter models are included: four C16 models and three C20 models.

Compare ENMU100412ZER-PH carbide milling inserts by supplier-reference dimensions, D530/D570/D580 grade options and the matching cutter-body information shown in the attachment. The platform is positioned for economical high-feed rough milling with four indexed cutting positions.

View Insert Dimensions Match Face Mills Match Shank Cutters Request Pricing

This page covers ENMU100412ZER-PH with D530, D570 and D580 grade options. Match the complete insert designation and the actual cutter pocket before ordering.

ENMU100412 product platform

ENMU100412 supplier-reference dimensions

Complete ModelENMU100412ZER-PH

Insert Size10 × 6 mm supplier platform

Thickness / Hole3.9 mm / 3.0 mm reference

Corner RadiusRE 1.2 mm

Grade OptionsD530, D570 and D580

Indexed PositionsFour positions from a double-sided design

Insert Identification

What Is an ENMU100412ZER-PH Insert?

ENMU100412ZER-PH is a compact indexable insert platform used in high-feed milling cutter bodies. Its double-sided structure is designed around two indexed positions per face, providing four cutting positions when the complete geometry and cutter pocket support both sides.

ESpecial Polygon ShapeManufacturer-defined insert outline

NNeutral ReliefSupports a double-sided platform

MM ToleranceDimensional tolerance class

UHole and Type CodeModel-specific clamping form

The complete ZER-PH suffix must be retained because it identifies manufacturer-specific edge, seating and chip-control details. Similar ENMU1004 products are not automatically interchangeable.

The The cutter-body model information from the attachment is retained. Match every model to the complete ENMU100412ZER-PH dimensions and actual pocket before purchase.

ENMU100412ZER-PH carbide high-feed milling insert

Supplier-Reference Dimensions

ENMU100412ZER-PH Insert Specifications

The dimensions below follow the retained ENMU100412ZER-PH attachment and should be matched against the final production drawing and actual cutter pocket.

Dimension Guide

Use the technical drawing in the first screen as the visual reference, then verify the actual insert before replacing an existing tool.

L: 10.0 mmOverall insert length W: 6.0 mmInsert width T: 3.9 mmSupplier-reference thickness D: 3.0 mmSupplier-reference mounting hole RE: 1.2 mmCorner-radius reference Edges: 4Two positions on each face

Complete Designation	L (mm)	W (mm)	T (mm)	D (mm)	RE (mm)	Listed Grade Options	Cutter Direction
ENMU100412ZER-PH	10.0	6.0	3.9	3.0	1.2	D530D570D580	MXG03R face mills and shank cutters; verify the complete pocket

Supplier-reference values are not a substitute for a tolerance drawing. Confirm thickness, hole diameter, seating surfaces and the complete ZER-PH suffix before releasing a replacement order.

Carbide Grade Selection

D530, D570 and D580 Grade Options

Grade selection should follow workpiece material, interruption, machine rigidity and observed wear. The descriptions below are general directions rather than universal cutting guarantees.

D530

Toughness-oriented direction for general steel, interrupted engagement and conditions where edge reliability is the priority.

D570

Balanced direction for common steel and stainless-steel milling under stable to moderately interrupted conditions.

D580

Wear-resistance direction for stable high-feed milling and selected cast-iron applications.

Use only the grade attached to the complete ENMU100412ZER-PH SKU. Stock availability and material suitability must be confirmed before quotation.

ENMU double-sided four-edge high-feed milling insert

Four-Position Economy

Double-Sided Insert with Four Indexed Positions

The ENMU1004 platform is designed around two indexed cutting positions on each face. When both faces remain usable and the pocket supports correct seating, one insert provides four cutting positions.

Two Positions per FaceIndex the insert according to the pocket and edge marks.

Double-Sided EconomyUse the opposite face only when seating and edge condition remain suitable.

High-Feed DirectionDesigned for small axial engagement and high feed per tooth in a compatible body.

Complete-Code ControlZER-PH geometry must match the actual cutter pocket.

Do not assume four usable positions solely from appearance. Insert damage, pocket wear or a model-specific edge form may prevent safe use of every position.

MXG03R internal-coolant face milling cutter for ENMU100412ZER-PH inserts

MXG03R Internal-Coolant Face Mills Face-mill models from the supplied attachment

Face Mill Compatibility

MXG03R Face Mills for ENMU100412ZER-PH

The supplied attachment lists three internal-coolant face-mill models. Match the complete model, diameter, bore, tooth count and actual insert pocket before ordering.

Ø50 mm22 mm bore with seven listed teeth.

Ø52 mm22 mm bore with seven listed teeth.

Ø63 mm22 mm bore with eight listed teeth.

Face Mill Model	Cutter Diameter (mm)	Bore (mm)	Teeth	Coolant Direction	Insert Platform
MXG03R-50-22-7T	50	22	7	Internal coolant	ENMU100412 platform; verify ZER-PH pocket
MXG03R-52-22-7T	52	22	7	Internal coolant	ENMU100412 platform; verify ZER-PH pocket
MXG03R-63-22-8T	63	22	8	Internal coolant	ENMU100412 platform; verify ZER-PH pocket

The attachment uses “MXG03R” model spelling, while the supplied image filename uses “MGX”. Use the actual engraved cutter code when confirming compatibility.

MXG03R shank cutters for ENMU100412ZER-PH inserts

MXG03R Shank Cutter Range Visible shank-cutter models from the supplied attachment

Shank Cutter Compatibility

MXG03R Shank Cutter Models

The supplied attachment visibly lists seven complete shank-cutter models. The code identifies the shank platform, cutting diameter, overall length and tooth count.

C16 PlatformØ16 or Ø17 cutting diameter, 160 or 200 mm length, two teeth.

C20 PlatformØ20 or Ø21 cutting diameter, 160 or 200 mm visible length, three teeth.

Model SelectionMatch shank size, cutting diameter, total length, pocket count and coolant design.

Shank Cutter Model	Shank Platform	Cutter Ø (mm)	Overall Length (mm)	Teeth	Insert Platform
MXG03R-C16-16-160-2T	C16	16	160	2	ENMU100412 platform; verify ZER-PH pocket
MXG03R-C16-16-200-2T	C16	16	200	2	ENMU100412 platform; verify ZER-PH pocket
MXG03R-C16-17-160-2T	C16	17	160	2	ENMU100412 platform; verify ZER-PH pocket
MXG03R-C16-17-200-2T	C16	17	200	2	ENMU100412 platform; verify ZER-PH pocket
MXG03R-C20-20-160-3T	C20	20	160	3	ENMU100412 platform; verify ZER-PH pocket
MXG03R-C20-20-200-3T	C20	20	200	3	ENMU100412 platform; verify ZER-PH pocket
MXG03R-C20-21-160-3T	C20	21	160	3	ENMU100412 platform; verify ZER-PH pocket

Only the seven visibly listed shank-cutter models are included. Do not infer additional lengths, diameters or C25/C32 models without another verified attachment.

High-Feed Applications

ENMU100412 Milling Applications

Actual capability depends on the complete ZER-PH geometry, carbide grade, cutter body, machine rigidity, engagement and workpiece setup.

High-Feed Rough Milling

Use small axial engagement and a verified high-feed body for efficient material removal.

Die and Mould Roughing

Suitable for broad roughing passes and remaining-stock removal when overhang is controlled.

Pocket and Face Roughing

Use a matching shank cutter or face mill with controlled radial engagement and chip evacuation.

Ramping and Helical Entry

Use only when the exact cutter-body documentation explicitly supports the required entry method.

Selection Checklist

How to Choose an ENMU100412 Insert and Cutter

Confirm the Full Insert CodeSpecify ENMU100412ZER-PH rather than only ENMU1004.

Check Supplier DimensionsVerify 10 × 6 mm, 3.9 mm thickness, 3.0 mm hole and RE 1.2 mm.

Select a Listed GradeChoose D530, D570 or D580 according to verified material and cutting conditions.

Record the Cutter CodeSend the complete MXG03R face-mill or shank-cutter model.

Inspect the PocketCompare seating surfaces, screw position and insert orientation.

State the ApplicationProvide material, depth, radial width, feed direction, coolant and current wear mode.

Frequently Asked Questions

ENMU100412ZER-PH FAQ

What are the ENMU100412ZER-PH dimensions?

The retained insert reference shows 10 mm length, 6 mm width, 3.9 mm thickness, a 3.0 mm mounting hole and a 1.2 mm corner radius. Confirm these values against the final production drawing.

Which grades are offered on this page?

This page uses D530, D570 and D580 grade options. The final choice depends on workpiece material, interruption, rigidity and observed wear.

How many cutting positions does an ENMU1004 insert have?

The double-sided design provides four indexed positions when both faces and the actual cutter pocket permit safe use.

Which face mills are listed?

The supplied attachment lists MXG03R-50-22-7T, MXG03R-52-22-7T and MXG03R-63-22-8T internal-coolant face mills.

Which shank cutters are listed?

Seven visible models are included: four C16 models covering Ø16 and Ø17 at 160 or 200 mm, plus three C20 models covering Ø20 and Ø21 in the visible lengths.

Is every ENMU1004 insert interchangeable?

No. Confirm the complete ZER-PH suffix, dimensions, seating form and cutter pocket. Similar family codes do not prove interchangeability.

Pricing and Compatibility Review

Request ENMU100412 Insert Pricing

Send the complete insert and cutter information so the dimensions, grade and pocket compatibility can be checked before quotation.

Complete ENMU100412ZER-PH code or a clear insert photo Required D530, D570 or D580 grade Complete MXG03R face-mill or shank-cutter model Workpiece material, hardness, depth, radial width and coolant direction Required quantity and current wear or fracture problem

ENMU Insert

ENMU100412ZER-PH High-Feed Milling Inserts

What Is an ENMU100412ZER-PH Insert?