원스톱 금속 가공 솔루션

방사형 칩 두께 감소 계산기

ONMY TOOLINGS · 밀링 계산기

방사형 칩 두께 감소 계산기

Calculate radial chip thinning factors and adjusted milling feed per tooth for light radial engagement.

온라인 계산기

결과는 위의 입력값을 기반으로 합니다. 예시 값은 설명을 위한 것이며, 특정 공구에 대한 속도/이송량 권장 사항이 아닙니다.

공식 및 계산 방법

For ae/D < 0.5: RCTF = 1 / sqrt[1 − (1 − 2ae/D)²]; fz = chip thickness × RCTF. Otherwise RCTF = 1.

For conventional side milling with small ae relative to D, maximum chip thickness becomes less than programmed feed per tooth. A radial chip-thinning correction increases feed per tooth so the peak chip thickness remains close to the chosen target. Above half-diameter radial engagement the radial compensation factor is 1.

주요 가정 및 한계

Assumes a 90-degree side-milling geometry and simplified engagement. Does not independently account for helix angle, axial chip thinning, machine acceleration, cutter deflection or unusually small engagements where rubbing dominates. Confirm machine power and tool limits.

자주 묻는 질문

When should I apply radial chip thinning?

Typically when radial engagement is less than half of the cutter diameter.

Is this automatically safe at every engagement?

No. Check cutter geometry, material, machine power, stability and recommended tool data.

적합한 절삭 공구가 필요하신가요?

이 계산 결과를 가공 대상 재료, 기계 설정 및 필요한 공구 치수에 맞춰 적용하십시오. ONMY 공구를 살펴보시거나, 견적을 요청하시려면 귀하의 적용 사례를 알려주십시오.

초경 엔드밀 살펴보기견적 요청하기

기술 참고 자료: Harvey Performance — Chip Thinning · Machining Doctor — Radial Depth of Cut. ONMY에 대한 계산은 독립적으로 수행되었으며, 출처 링크가 있다고 해서 이를 지지한다는 의미는 아닙니다.

맨 위로 스크롤

지금 바로 매출 증대

CNC 공구 업계의 진정한 베테랑이 필요합니다. ONMY 툴링이 업계 1위가 될 수 있도록 도와드리겠습니다.