Calculadora de adelgazamiento radial de virutas
Calculate radial chip thinning factors and adjusted milling feed per tooth for light radial engagement.
Calculadora en línea
Los resultados se basan en los datos introducidos anteriormente; los valores de ejemplo son meramente ilustrativos y no constituyen recomendaciones específicas de velocidad o avance para esta herramienta.
Fórmulas y método de cálculo
For ae/D < 0.5: RCTF = 1 / sqrt[1 − (1 − 2ae/D)²]; fz = chip thickness × RCTF. Otherwise RCTF = 1.
For conventional side milling with small ae relative to D, maximum chip thickness becomes less than programmed feed per tooth. A radial chip-thinning correction increases feed per tooth so the peak chip thickness remains close to the chosen target. Above half-diameter radial engagement the radial compensation factor is 1.
Supuestos y limitaciones importantes
Assumes a 90-degree side-milling geometry and simplified engagement. Does not independently account for helix angle, axial chip thinning, machine acceleration, cutter deflection or unusually small engagements where rubbing dominates. Confirm machine power and tool limits.
Preguntas frecuentes
When should I apply radial chip thinning?
Typically when radial engagement is less than half of the cutter diameter.
Is this automatically safe at every engagement?
No. Check cutter geometry, material, machine power, stability and recommended tool data.
¿Necesita la herramienta de corte adecuada?
Adapta este cálculo al material de su pieza de trabajo, la configuración de la máquina y las dimensiones requeridas de las herramientas. Explore las herramientas de ONMY o comparte su aplicación para recibir una cotización.
Descubra las fresas de carburoSolicitar cotizaciónReferencias técnicas: Harvey Performance — Chip Thinning · Machining Doctor — Radial Depth of Cut. Los cálculos se realizan de manera independiente para ONMY; los enlaces a las fuentes no implican ningún respaldo.