Accueil / Plaquettes de fraisage / SE Face Milling Inserts

Positive Face Milling Insert Range

SEET, SEKT, SEHT & SEER Face Milling Inserts

Compare SEET1203AFEN, SEKT1204AFTN, SEHT1204AFFN, SEER1203AFS and SEER1504AFS by dimensions, geometry direction, grade availability and cutter compatibility. Match SEKT1204AFTN and SEHT1204AFFN to TSE-45 face milling cutters, and match SEET1203AFEN plus the SEER platforms to compatible SE-12 cutter bodies.

Afficher les caractéristiques techniques de l'insert Match TSE-45 Cutters Demander un devis

SEKT1204 face milling inserts for general-purpose machining

SEKT1204 general-purpose face milling inserts

SE face milling insert appearance

Product ModelsFive complete SE face milling insert codes

Size Platforms1203, 1204 and 1504

Verified D GradesD530, D570, D580, D7320 et D01

SEET1203 Grade OptionsD530, D570 and D580

Cutter PlatformsTSE-45 for 1204; SE-12 for SEET and SEER

TSE-45 Cutter RangeØ50–250 mm, 4–14 teeth

Browse by Product

Five SE Face Milling Insert Models

Use the complete designation rather than ordering from the two-letter “SE” family name. Dimensions, grades and cutter compatibility differ between the 1203, 1204 and 1504 platforms.

SEET1203AFEN

1203 Face Milling Platform

L and IC 12.55 mm, thickness 3.18 mm and RE 0.80 mm. Grade Options are D530, D570 and D580; cutter platform is SE-12.

View SEET specifications

SEKT1204AFTN

General 1204 Face Milling

13.40 mm IC platform with four coated grade options and confirmed TSE-45 compatibility.

View SEKT specifications

SEHT1204AFFN

Aluminium / Métaux non ferreux

The same core 1204 dimensions with D01 grade direction and confirmed TSE-45 compatibility.

View SEHT specifications

SEER1203AFS

Compact SEER Platform

12.58 mm IC and 3.44 mm thickness for a compatible SE-12 face milling cutter.

View SEER1203 specifications

SEER1504AFS

Larger SEER Platform

15.88 mm IC and 4.88 mm thickness for a larger compatible SE-12 face milling cutter.

View SEER1504 specifications

Product Family Definition

What Are SEET, SEKT, SEHT and SEER Inserts?

These are square positive-relief indexable milling insert families used for face milling in compatible cutter bodies.

The first two letters identify the square shape and positive clearance direction, while the following letters and numbers distinguish tolerance, clamping form, size and geometry. The complete code is required because SEET1203, SEKT1204, SEHT1204, SEER1203 and SEER1504 are not one universal pocket.

SEKT1204AFTN and SEHT1204AFFN use the TSE-45 platform. SEET1203AFEN, SEER1203AFS and SEER1504AFS use the SE-12 cutter platform; the exact SE-12 pocket must still match the selected size.

SEET

SEET1203AFEN

12.55 mm square platform, 3.18 mm thickness and 0.80 mm corner radius. Grades D530, D570 and D580; compatible with the SE-12 platform.

SEKT

General Coated 1204

AFTN geometry and D530, D570, D580 or D7320 grade options.

SEHT

Non-Ferrous 1204

AFFN geometry with D01 grade for aluminum and related non-ferrous direction.

1203

SEER1203AFS

Compact SEER platform with a 2.30 mm mounting-hole dimension for a compatible SE-12 cutter.

1504

SEER1504AFS

Larger SEER platform with 15.88 mm IC and 4.88 mm thickness for a compatible SE-12 cutter.

Dimensions et options de qualité

SE Face Milling Insert Specifications

Compare the verified dimensions, grade options and cutter platforms for the five listed SE face milling inserts.

SEKT1204 and SEHT1204 insert dimension drawing

SEKT / SEHT 1204 Dimension Drawing Used with the TSE-45 face milling cutter platform.

SEET1203AFEN Dimension Drawing Used with the compatible SE-12 face milling cutter platform.

Désignation complète	L (mm)	IC (mm)	T (mm)	D (mm)	BS (mm)	RE (mm)	Options de notation	Mode d'emploi	Plateforme de découpe
SEET1203AFEN	12.55	12.55	3.18	-	-	0.80	D530D570D580	Fraisage général de face	SE-12
SEKT1204AFTN	-	13.40	3.97	4.30	2.45	-	D530D570D580D7320	General 45° face milling	TSE-45
SEHT1204AFFN	-	13.40	3.97	4.30	2.45	-	D01	Aluminum and non-ferrous face milling	TSE-45
SEER1203AFS	-	12.58	3.44	2.30	2.00	-	D530D570D580D7320	Fraisage général de face	SE-12
SEER1504AFS	-	15.88	4.88	3.20	2.20	-	D530D570D580D7320	Larger SEER face milling platform	SE-12

SEKT1204AFTN and SEHT1204AFFN use TSE-45 cutter bodies. SEET1203AFEN, SEER1203AFS and SEER1504AFS use SE-12 cutter bodies; match the exact 1203 or 1504 pocket before ordering.

Product Comparison

SEET vs SEKT vs SEHT vs SEER

SEET1203AFEN

SE-12 1203 Platform

L and IC 12.55 mm with 0.80 mm corner radius.
Grade Options: D530, D570 and D580.
Uses a compatible SE-12 cutter body.

SEKT1204AFTN

General Face Milling

Confirmed TSE-45 1204 platform.
Four coated grade options.
Steel, stainless and cast-iron grade directions.

SEHT1204AFFN

Aluminum Direction

Confirmed TSE-45 1204 platform.
D01 grade only.
Non-ferrous and aluminum face-milling direction.

SEER1203 / 1504

SE-12 Cutter Platform

Two different SEER size platforms.
Four coated grade options.
Match the exact SE-12 pocket to the 1203 or 1504 insert.

Orientation de la nuance de carbure

Grade Options by Workpiece Material

First verify that the grade is listed for the complete insert model, then match the material, machining stability, coolant and wear mode. SEET1203AFEN is available in D530, D570 and D580.

D530

Acier et fonte : applications où la ténacité et la fiabilité lors de la coupe en intermittence sont essentielles.

D570

Orientation générale concernant l'acier et l'acier inoxydable, y compris des charges de finition stables et plus légères.

D580

Acier et fonte : solution idéale pour répondre à des exigences spécifiques en matière de stabilité d'usinage et de résistance à l'usure.

D7320

Consignes générales concernant l'acier, l'acier inoxydable et la fonte.

D01

Aluminum and non-ferrous direction, listed only for SEHT1204AFFN.

TSE-45 face milling cutter for SEKT1204 and SEHT1204 inserts

TSE-45 Face Milling Cutter Compatible with SEKT1204AFTN and SEHT1204AFFN.

Confirmed Cutter Compatibility

Match SEKT and SEHT 1204 Inserts to TSE-45 Cutters

The TSE-45 face milling range is specified for the SE□T1204 platform. This confirms the SEKT1204AFTN and SEHT1204AFFN size direction, but the complete geometry and actual pocket condition must still be checked.

Ø 50–63 mm4- and 5-tooth cutters with 22 mm bores.

Ø 80–100 mm6- and 7-tooth cutters with 27 or 32 mm bores.

Ø 125–160 mm8- and 10-tooth cutters with 40 mm bores.

Ø200–250 mm12- and 14-tooth cutters with 60 mm bores.

TSE-45 uses M5×12 insert screws and a T20 wrench. This section applies to SEKT1204AFTN and SEHT1204AFFN.

View TSE-45 Models Face Milling Tools

Complete Cutter Range

TSE-45 Face Milling Cutter Models

Modèle de découpeuse	Dents	Cutting ØD (mm)	Maximum ØD1 (mm)	Alésage Ø (mm)	Length (mm)	W (mm)	T (mm)	Plateforme d'insertion
TSE12-50-22-4T	4	50	64	22	50	10.4	6.3	SEKT1204 / SEHT1204
TSE12-63-22-5T	5	63	77	22	50	10.4	6.3	SEKT1204 / SEHT1204
TSE12-80-27-6T	6	80	94	27	50	12.4	7.0	SEKT1204 / SEHT1204
TSE12-100-32-7T	7	100	114	32	50	14.4	8.0	SEKT1204 / SEHT1204
TSE12-125-40-8T	8	125	139	40	63	16.4	9.0	SEKT1204 / SEHT1204
TSE12-160-40-10T	10	160	174	40	63	16.4	9.0	SEKT1204 / SEHT1204
TSE12-200-60-12T	12	200	210	60	63	25.7	16.4	SEKT1204 / SEHT1204
TSE12-250-60-14T	14	250	260	60	63	25.7	16.4	SEKT1204 / SEHT1204

SE-12 face milling cutter for SEET1203AFEN and SEER inserts

SE-12 Face Milling Cutter TSE12-100-32-7T image reference for the SE-12 cutter platform.

SE-12 Cutter Compatibility

Match SEET1203AFEN and SEER Inserts to SE-12 Cutters

SEET1203AFEN, SEER1203AFS and SEER1504AFS use the SE-12 face milling cutter platform. The exact cutter pocket must match the selected 1203 or 1504 insert size.

SEET1203AFEND530, D570 and D580 grade options; use the matching SE-12 1203 pocket.

SEER1203AFSCompact SEER1203 platform; use the matching SE-12 1203 pocket.

SEER1504AFSLarger SEER1504 platform; use the matching SE-12 1504 pocket.

Model VerificationConfirm cutter diameter, bore, tooth count, screw and actual pocket before quotation.

Do not substitute a 1203 insert into a 1504 pocket, or place an SE-12 insert into the TSE-45 1204 platform.

Send Your SE-12 Cutter Code Face Milling Tools

Applications du fraisage frontal

SE Face Milling Insert Applications

Actual feed, depth and surface result depend on the complete insert, grade, cutter body, workpiece material, machine rigidity and setup.

Fraisage frontal à 45°

Primary application for SEKT1204AFTN and SEHT1204AFFN in compatible TSE-45 cutters.

Outils de fraisage frontal

Steel Face Milling

Use a listed coated grade according to stability, interruption and wear mode.

Fraisage de l'acier inoxydable

D570 or D7320 direction can be reviewed where the complete model and conditions are suitable.

Cast Iron Milling

D530, D580 or D7320 direction can be selected according to stability and edge condition.

Aluminum Face Milling

SEHT1204AFFN in D01 is the confirmed non-ferrous product direction.

SE-12 Face Milling

Use SEET1203AFEN, SEER1203AFS or SEER1504AFS with the matching SE-12 cutter pocket.

Liste de contrôle pour la sélection

How to Choose an SE Face Milling Insert

Vérifier le corps de la fraiseRecord the complete TSE-45 or SE-12 face-mill model and pocket.

Select the Correct FamilyChoose SEET, SEKT, SEHT or SEER according to the existing insert and cutter.

Confirm the SizeMatch the 1203, 1204 or 1504 platform exactly.

Check Every Available DimensionConfirm L, IC, T, D, BS and RE where they apply to the selected model.

Sélectionnez une classe disponibleUse only a grade listed for the complete product designation.

State Material and OperationInclude material, hardness, face-milling depth, interruption and finish target.

Envoyer les données relatives aux quantités et à la durée de vie des outilsProvide quantity, cutting data, current wear problem and packaging requirement.

Demander un devis

Request SE Face Milling Insert Pricing and Compatibility Review

Provide the complete insert and cutter details so the correct dimensions, grade, geometry and pocket fit can be checked.

Complete SEET1203AFEN, SEKT1204AFTN, SEHT1204AFFN, SEER1203AFS or SEER1504AFS code TSE-45 or SE-12 cutter-body model, pocket photo, screw and wrench information Workpiece material, hardness, operation and surface-finish target Current cutting speed, feed, depth and interruption condition Problème lié à la quantité requise, au conditionnement et à la durée de vie actuelle des outils

SEET, SEKT, SEHT & SEER Face Milling Inserts