LOGU030310ER High-Feed Milling Inserts
Compare LOGU030310ER double-sided carbide inserts by dimensions and grade options. Match the complete insert code to compatible MFH03 high-feed milling cutter bodies for face milling, pocket roughing, ramping and related shallow-depth operations.
High-Feed Insert for Stable Shallow-Depth Metal Removal
LOGU030310ER uses a convex cutting-edge form and a double-sided four-edge design. In a compatible MFH03 cutter, the small entering-angle action supports high feed per tooth while keeping the axial depth comparatively shallow.
Four Usable Edges
Two cutting positions on each side help reduce the cost per indexed edge.
1.0 mm Corner Radius
The listed LOGU030310ER model uses an RE value of 1.0 mm.
High-Feed Direction
Designed for productive shallow-depth roughing in compatible size-03 cutter bodies.
MFH03 Platform
Matches the MFH03 family from compact Ø16 mm to larger Ø35 mm shank cutters.
What Is a LOGU High-Feed Insert?
LOGU030310ER is a double-sided rectangular indexable insert for compatible high-feed face mills and end mills.
The complete model identifies the shape, relief direction, tolerance, clamping form, size, corner radius and right-hand cutting direction. Similar rectangular high-feed inserts are not automatically interchangeable because the pocket, hole, thickness and edge form can differ.
LOGU030310ER Insert Specifications
Use all five dimensions and the complete cutter pocket when matching a replacement. Grade availability is limited to the combinations shown below.
| Complete Designation | L (mm) | W (mm) | T (mm) | D (mm) | RE (mm) | Cutting Edges | Grade Options | Cutter Platform |
|---|---|---|---|---|---|---|---|---|
| LOGU030310ER | 11.9 | 6.2 | 3.96 | 3.45 | 1.0 | 4 | D530D570D580D7320 | MFH03 |
Searching for LOGU030310ER-GM?
Many replacement searches and third-party product pages include the “-GM” suffix. Send the complete existing code or a clear insert photo so the suffix, edge form and MFH03 pocket can be verified before quotation.
LOGU Grade Options by Workpiece Material
Select only a grade listed for LOGU030310ER, then match the grade direction to the workpiece material, machine stability, coolant and wear mode.
Steel and cast-iron direction where toughness and interrupted-cut reliability are important.
General steel and stainless-steel direction, including stable and lighter finishing loads.
Steel and cast-iron direction for selected stable machining and wear-resistance requirements.
General-purpose direction across steel, stainless steel and cast iron.
Match LOGU030310ER Inserts to MFH03 Cutters
The MFH03 cutter range uses LOGU030310ER across several diameters, shanks, flute counts and body lengths. Confirm the full holder code rather than selecting from cutter diameter alone.
Double-Sided Design with Four Usable Cutting Edges
LOGU030310ER provides two usable cutting positions on each side. Correct indexing and stable pocket seating allow four cutting edges before the insert is replaced.
LOGU030310ER Milling Applications
Actual feed, ramping capability and axial depth depend on the complete MFH03 body, insert grade, machine rigidity and workpiece setup.
High-Feed Face Milling
For rapid removal of shallow stock with high feed per tooth and controlled axial depth.
High-feed milling toolsPocket Roughing
For cavity and pocket roughing when chip evacuation and radial engagement are controlled.
Ramping
For MFH03 cutter bodies designed for oblique entry into the workpiece.
Helical Interpolation
For suitable cutter bodies when the helix, clearance and centre-cutting conditions are confirmed.
Plunging
For cutter configurations specifically designed to support axial entry and plunge movement.
Long-Overhang Roughing
Low-force high-feed action can improve stability in selected extended-reach setups.
How to Choose a LOGU030310ER Insert
Request LOGU030310ER Pricing and MFH03 Compatibility Review
Provide the complete insert and cutter information so the correct dimensions, grade, suffix and cutter fit can be checked.
