Tapping Speed and Feed Calculator
Calculate tapping spindle RPM, synchronous axial feed and theoretical cutting time for metric and inch threads.
Online Calculator
Results use the inputs above; example values are illustrative and are not tool-specific speed/feed recommendations.
Formulas and Calculation Method
RPM = 1000 vc / (πD); tapping feed = RPM × pitch in mm/min or RPM / TPI in in/min; time = depth / feed.
Synchronous tapping requires axial feed to match the thread lead per revolution. For a normal single-start thread, lead equals pitch; the tapping feed follows spindle RPM times pitch. In imperial threading this is expressed as RPM divided by TPI in inches per minute. Determine an appropriate cutting speed from the actual tap, substrate and material.
Important Assumptions and Limitations
Single-start threads only. Does not include reversing, tapping acceleration, approach, dwell, chip evacuation or tap drill selection. Rigid-tapping synchronization capabilities must be verified on your control.
Frequently Asked Questions
Why is tapping feed tied to spindle speed?
The tap must advance one thread lead per revolution to follow the generated thread.
Does this work for form taps?
The kinematic feed relation does, but the tap design and recommended cutting speed differ.
Need the Right Cutting Tool?
Match this calculation to your workpiece material, machine setup and required tooling dimensions. Explore ONMY tools or share your application for a quotation.
Explore Threading ToolsRequest a QuoteTechnical references: Haas — Tapping and Threading Formulas. Calculations are independently implemented for ONMY; source links do not imply endorsement.