Home / Milling Inserts / LPGT010210ER

Small-Diameter High-Feed Milling Insert

LPGT010210ER High-Feed Milling Inserts

LPGT010210ER is a compact positive-relief carbide insert for MFH small-diameter high-feed shank cutters. Compare its dimensions, D530/D570/D580/D7320 grade options and the complete Ø8–16 mm cutter range before selecting a replacement.

View Insert Dimensions View MFH Cutters Request Pricing

The insert catalogue uses the complete code LPGT010210ER. The cutter catalogue lists the size platform as LPGT010210; confirm the ER geometry and the actual pocket before replacement.

LPGT010210ER high-feed milling insert family

LPGT high-feed insert family

LPGT010210ER dimensional reference

Complete ModelLPGT010210ER

Insert Dimensions6.26 × 4.19 × 2.19 mm

Hole / RadiusD 2.10 mm, RE 1.0 mm

Listed GradesD530, D570, D580 and D7320

Cutter RangeMFH Ø8–16 mm shank cutters

HardwareM1.8 screw and T6 wrench

Insert Identification

What Is an LPGT010210ER Insert?

LPGT010210ER is a small positive-relief insert designed for compact high-feed cutter pockets. Its 1.0 mm corner radius and short 6.26 mm body suit small-diameter tools where access, cutting-force control and economical roughing are important.

LRectangular ShapeCompact elongated insert outline

PPositive ReliefLow-force cutting-edge direction

GPrecision ClassDimensional tolerance code

THole and Type CodeModel-specific clamping form

Retain the full 010210ER designation. The ER suffix identifies manufacturer-specific geometry and should not be omitted when checking an existing cutter pocket.

Do not position LPGT010210ER as a 90° square-shoulder insert. Its primary product direction in the supplied cutter catalogue is small-diameter high-feed milling.

LPGT010210ER carbide high-feed milling insert

Insert Specifications

LPGT010210ER Dimensions and Grade Availability

Use all five dimensions and the complete ER suffix when comparing a replacement insert.

Dimension Guide

L: 6.26 mmOverall insert length W: 4.19 mmInsert width T: 2.19 mmInsert thickness D: 2.10 mmFixing-hole diameter RE: 1.0 mmCorner radius Suffix: ERManufacturer-specific geometry

Complete Model	L (mm)	W (mm)	T (mm)	D (mm)	RE (mm)	Listed Grades	Matching Cutter Platform
LPGT010210ER	6.26	4.19	2.19	2.10	1.0	D530D570D580D7320	MFH small-diameter holders listing LPGT010210; verify ER pocket

The technical drawing and catalogue dimensions should be checked together. Similar small inserts can use different thicknesses, holes, seats or edge geometries.

Carbide Grade Direction

D530, D570, D580 and D7320 Grades

These four grades are listed for LPGT010210ER in the supplied insert catalogue. Final selection depends on the workpiece, interruption, cutter overhang and observed wear.

D530

Toughness-oriented direction for steel and interrupted engagement where edge security is the priority.

D570

Balanced direction for general steel and stainless-steel rough milling under stable to moderately interrupted conditions.

D580

Wear-resistance direction for stable milling and selected cast-iron or mould-steel applications.

D7320

Additional catalogue-listed option. Confirm the exact material and cutting-data recommendation for the complete SKU.

Grade descriptions are general selection directions, not universal guarantees. Verify stock availability and cutting conditions before quotation.

LPGT010210ER insert mounted in a small-diameter high-feed cutter

Insert-to-Cutter Match

LPGT010210ER for MFH Small-Diameter Cutters

The cutter catalogue gives a direct size-platform match between LPGT010210 and the MFH Ø8–16 mm holder range. Keep the full ER insert suffix and the complete MFH cutter code on the RFQ.

Ø8–9 mm CuttersSingle-flute bodies for the smallest accessible diameters.

Ø10–13 mm CuttersTwo-flute bodies, plus selected Ø12 and Ø13 three-flute versions.

Ø14–16 mm CuttersThree- and four-flute bodies with 120 mm total length.

Compact HardwareM1.8 insert screw with T6 wrench across the listed MFH range.

Ramping, helical entry or plunging capability depends on the exact cutter-body geometry. Do not promise an entry method from the insert code alone.

MFH small-diameter high-feed shank cutter for LPGT010210ER inserts

Complete MFH Holder Range

MFH Ø8–16 mm Shank Cutter Models

The supplied cutter catalogue lists eleven holders with one to four flutes. Ø8–13 bodies are 100 mm long, while Ø14–16 bodies are 120 mm long.

One FluteØ8 and Ø9 for compact access and lower tooth engagement.

Two FlutesØ10, Ø11, Ø12 and Ø13 standard small-diameter range.

Three FlutesØ12, Ø13 and Ø14 higher-tooth-count options.

Four FlutesØ15 and Ø16 bodies for higher table-feed potential in stable setups.

Cutter Specifications

MFH Small-Diameter Cutter Table

Cutter Model	Flutes	Cutter Ø D (mm)	Shank Ø d (mm)	Total Length L (mm)	Blade Length L1 (mm)	Insert Platform	Screw	Wrench
MFH 8-S8-01-100	1	8	8	100	20	LPGT010210 / verify ER	M1.8	T6
MFH 9-S8-01-100	1	9	8	100	20	LPGT010210 / verify ER	M1.8	T6
MFH 10-S10-01-100-2T	2	10	10	100	20	LPGT010210 / verify ER	M1.8	T6
MFH 11-S10-01-100-2T	2	11	10	100	20	LPGT010210 / verify ER	M1.8	T6
MFH 12-S12-01-100-2T	2	12	12	100	20	LPGT010210 / verify ER	M1.8	T6
MFH 13-S12-01-100-2T	2	13	12	100	20	LPGT010210 / verify ER	M1.8	T6
MFH 12-S12-01-100-3T	3	12	12	100	20	LPGT010210 / verify ER	M1.8	T6
MFH 13-S12-01-100-3T	3	13	12	100	20	LPGT010210 / verify ER	M1.8	T6
MFH 14-S14-01-120-3T	3	14	14	120	25	LPGT010210 / verify ER	M1.8	T6
MFH 15-S14-01-120-4T	4	15	14	120	25	LPGT010210 / verify ER	M1.8	T6
MFH 16-S16-01-120-4T	4	16	16	120	25	LPGT010210 / verify ER	M1.8	T6

Ø12 and Ø13 are available in both 2T and 3T versions. Select tooth count according to machine rigidity, chip evacuation, engagement and required table feed.

High-Feed Applications

Small-Diameter Rough Milling Applications

Use LPGT010210ER where a compact cutter is needed for roughing inside small cavities, mould features or restricted-access areas.

Small-Diameter High-Feed Roughing

Use low axial engagement and a verified MFH body for efficient material removal.

Pocket and Cavity Roughing

Reach compact internal features with Ø8–16 mm cutter diameters.

Die and Mould Machining

Rough narrow mould regions while controlling cutting force and tool access.

Long-Reach Small Features

Use 100 or 120 mm bodies with the shortest practical overhang and stable clamping.

LPGT high-feed insert for small-diameter rough milling applications

Selection Checklist

How to Select an LPGT Insert and MFH Cutter

Keep the Full Insert CodeSpecify LPGT010210ER rather than only LPGT010210.

Choose Cutter DiameterSelect Ø8–16 mm according to feature access, corner clearance and rigidity.

Select Tooth CountCompare one-, two-, three- and four-flute options according to engagement and chip evacuation.

Confirm the GradeChoose D530, D570, D580 or D7320 for the verified material and wear condition.

Check HardwareUse the specified M1.8 screw and T6 wrench, and inspect the pocket before replacement.

Control OverhangUse the shortest stable setup and confirm cutting data for the exact body.

Frequently Asked Questions

LPGT010210ER Milling Insert FAQ

What are the LPGT010210ER dimensions?

The insert catalogue lists L 6.26 mm, W 4.19 mm, T 2.19 mm, fixing-hole diameter 2.10 mm and corner radius 1.0 mm.

Which grades are listed for LPGT010210ER?

The catalogue lists D530, D570, D580 and D7320.

Which cutter uses LPGT010210ER inserts?

The supplied cutter catalogue lists MFH small-diameter high-feed holders from Ø8 to Ø16 mm for the LPGT010210 platform. Confirm the full ER geometry against the actual pocket.

What is the difference between the Ø12 and Ø13 2T and 3T cutters?

They use the same cutting and shank diameters but different tooth counts. The 3T version can support higher table feed in a stable setup, while the 2T version provides more chip space.

What screw and wrench are required?

The cutter catalogue specifies an M1.8 screw and T6 wrench across the listed MFH small-diameter range.

Can LPGT cutters ramp or enter helically?

Only when the exact cutter-body documentation supports the required entry method. The insert code alone does not confirm ramping or helical capability.

Pricing and Compatibility Review

Request LPGT010210ER Insert Pricing

Send the complete insert and MFH cutter information so dimensions, grade, tooth count, hardware and application can be checked before quotation.

Complete LPGT010210ER code and required grade Complete MFH cutter model, diameter and tooth count Workpiece material, hardness, cutting depth and radial engagement Tool overhang, coolant condition and current wear problem Required insert quantity and need for screws or T6 wrench

LPGT Insert

LPGT010210ER High-Feed Milling Inserts

What Is an LPGT010210ER Insert?