Home / Milling Inserts / XOMX Inserts

Single-Sided Two-Edge Square Shoulder Inserts

XOMX Turbo Square Shoulder Milling Inserts

Q: Which XOMX insert fits the attached R217.69 and R220.69 cutters?

The attachment uses the Turbo 12 seat designation, so the matching platform is XOMX1204, including XOMX120408TR-M12 after pocket verification.

Compare XOMX060204R-M05, XOMX060208R-M05, XOMX10T308TR-M09, XOMX120408TR-M12 and XOMX180608TR-M14 by pocket size, cutting-edge length, thickness, hole diameter and corner radius. These single-sided two-edge inserts are used for true 90° square shoulder milling in a matching Turbo-style cutter body.

View XOMX Dimensions Match Turbo 12 Cutters Request Pricing

This page describes compatible supplier inserts and cutter references. Do not present a product as original Seco manufacture unless the specific supplied item has been independently verified as genuine.

XOMX Turbo square shoulder milling inserts

XOMX square shoulder insert family

XOMX dimension and geometry reference

Main OperationTrue 90° square shoulder milling

Cutting EdgesTwo edges on a single-sided insert

Seat PlatformsTurbo 06, 10, 12 and 18

Relief Angle15° across the listed models

Grade FrameworkD530, D570 and D580 compatible grades

Matched AttachmentTurbo 12 cutter bodies for XOMX1204

Product Family

Five Complete XOMX Insert Models

The XOMX family uses different cutter-pocket sizes. An XOMX0602 insert does not fit a Turbo 10, 12 or 18 pocket, and the attached R217.69 / R220.69 cutter references are limited to the Turbo 12 platform.

XOMX060204R-M05Turbo 06, RE 0.4 mm, BS 0.9 mm

XOMX060208R-M05Turbo 06, RE 0.8 mm, BS 0.5 mm

XOMX10T308TR-M09Turbo 10, RE 0.8 mm, BS 1.3 mm

XOMX120408TR-M12Turbo 12, RE 0.8 mm, BS 1.6 mm

XOMX180608TR-M14Turbo 18, RE 0.8 mm, BS 2.3 mm

M05, M09, M12 and M14 are size-specific geometry codes. They are not carbide-grade names and should not be used alone to promise suitability for a workpiece material.

XOMX single-sided two-edge indexable milling insert

Insert Dimensions

XOMX0602, XOMX10T3, XOMX1204 and XOMX1806 Specifications

Use the complete model, pocket size, thickness, fixing-hole diameter and corner radius together. The effective cutting-edge length is not the same as the maximum cutting depth of every cutter body.

Dimension Guide

The first-screen drawing is the visual reference for the dimensional labels used in the table.

LEEffective cutting-edge length W1Insert width SInsert thickness D1Fixing-hole diameter RECorner radius BSWiper-flat length ANMain relief angle CEDCUsable cutting-edge count

Complete Model	Pocket	LE (mm)	W1 (mm)	S (mm)	D1 (mm)	RE (mm)	BS (mm)	AN	Edges
XOMX060204R-M05	Turbo 06	5.5	4.1	2.45	1.9	0.4	0.9	15°	2
XOMX060208R-M05	Turbo 06	5.5	4.1	2.45	1.9	0.8	0.5	15°	2
XOMX10T308TR-M09	Turbo 10	9.3	6.9	3.83	3.0	0.8	1.3	15°	2
XOMX120408TR-M12	Turbo 12	11.6	8.2	5.07	3.9	0.8	1.6	15°	2
XOMX180608TR-M14	Turbo 18	17.0	11.2	6.4	5.0	0.8	2.3	15°	2

Do not mix pocket sizes. The complete cutter-body designation must identify the same seat platform as the insert: 06, 10, 12 or 18.

Compatible Grade Framework

D530, D570 and D580 Grade Direction

These are compatible supplier-grade directions, not original Seco grade designations. Final availability must be confirmed for every complete XOMX model.

D530

Toughness-oriented direction for steel, interrupted shoulders and applications where edge security is the priority.

D570

Balanced direction for common steel and stainless-steel milling in stable to moderately interrupted conditions.

D580

Wear-resistance direction for stable square shoulder milling and selected cast-iron applications.

Coating color is not a grade specification. Select by the actual carbide-grade code, workpiece material, interruption and wear mode.

Large-size XOMX Turbo milling insert visual reference

Single-Sided Design

Two Cutting Edges per XOMX Insert

The XOMX Turbo platform is a single-sided design with two usable cutting edges. It should not be promoted as a double-sided four-edge insert.

True 90° Shoulder DirectionUse in a compatible body designed to generate a square wall and floor.

Two Indexed EdgesRotate the insert according to the pocket and wear condition.

Wiper FlatModel-specific BS values support floor-finish control.

Center-Screw ClampingConfirm screw, driver and pocket seat for the complete cutter.

The supplied image filename contains “190608TR”, while the verified model in the product list is XOMX180608TR-M14. Treat the image as a visual reference and use the complete engraved insert code for ordering.

Turbo 12 square shoulder cutter for XOMX120408TR-M12 inserts

Turbo 12 Cutter Direction The attachment’s R217.69 and R220.69 bodies use the XOMX1204 pocket platform

XOMX1204 Cutter Compatibility

R217.69 Shank Cutters and R220.69 Face Mill

The supplied cutter attachment is limited to the Turbo 12 platform and should be matched to XOMX120408TR-M12. It must not be presented as compatible with the XOMX0602, XOMX10T3 or XOMX1806 platforms.

Confirmed Standard ReferenceR217.69-2020.0-12-2AN: Ø20, 20 mm shank, 150 mm overall length, two teeth.

Supplier-Compatible VariantsThe 2524 / 2525 attachment codes require their own drawings before being presented as original-standard equivalents.

Face-Mill ReferenceR220.69-0050-12-5AN: Ø50, 22 mm bore, five teeth and Turbo 12 pocket.

View Cutter Models Send Your Cutter Code

Attachment and Standard References

Turbo 12 Cutter Model Table

Cutter Model	Cutting Ø (mm)	Shank / Bore (mm)	Overall / Functional Length	Teeth	Insert Platform
R217.69-2020.0-12-2AN	20	20 shank	150 mm overall	2	XOMX1204 / XOMX120408TR-M12
R217.69.2524.0-12-3AN	25 nominal	24 shank nominal	150 mm stated	3 stated	Turbo 12; verify pocket drawing
R217.69.2525.0-12-2AN	25 nominal	25 shank nominal	150 mm stated	2 stated	Turbo 12; verify pocket drawing
R220.69-0050-12-5AN	50	22 bore	40 mm functional	5	XOMX1204 / XOMX120408TR-M12

Model-code discrepancy: the currently searchable standard 25 mm cylindrical-body reference is R217.69-2525.0-12-3AN with 25 mm shank, three teeth and 170 mm overall length. Do not silently convert the supplier’s 2524 / 2525 variants into that standard model.

Machining Applications

XOMX Square Shoulder Milling Applications

Actual capability depends on the complete insert geometry, grade, cutter body, overhang, engagement and workpiece setup.

90° Square Shoulder Milling

Create a floor and wall using a matching Turbo-style shoulder cutter.

Side and Face Milling

Use controlled radial engagement to machine walls, steps and broad surfaces.

Slot Milling

Confirm chip evacuation, cutter width and full-slot cutting data before use.

Pocket and Profile Milling

Suitable for open pockets and contour roughing with a correctly sized cutter body.

Ramping and Plunging

Use only when the exact cutter-body documentation supports the required entry method.

Selection Checklist

How to Choose an XOMX Insert and Cutter

Identify the Pocket SizeConfirm Turbo 06, 10, 12 or 18 from the complete cutter engraving.

Keep the Complete Insert CodeRecord the radius and geometry suffix, not only XOMX0602 or XOMX1204.

Verify DimensionsMatch LE, W1, S, D1, RE and the actual seating surfaces.

Select the GradeChoose D530, D570 or D580 according to verified material and wear conditions.

Check the Cutter ModelFor the attached R217.69 / R220.69 bodies, use the Turbo 12 XOMX1204 platform.

Confirm Clamping PartsRecord the screw, wrench and pocket condition before replacement.

Frequently Asked Questions

XOMX Milling Insert FAQ

Are XOMX inserts single-sided or double-sided?

The listed XOMX Turbo inserts are single-sided and provide two usable cutting edges.

Are XOMX0602, XOMX10T3, XOMX1204 and XOMX1806 interchangeable?

No. They use different pocket sizes, widths, thicknesses and fixing-hole diameters. Match the insert to the same cutter-seat platform.

What is the difference between XOMX060204R-M05 and XOMX060208R-M05?

Both use the Turbo 06 pocket. The 0204 model has a 0.4 mm corner radius and 0.9 mm wiper flat, while the 0208 model has a 0.8 mm radius and 0.5 mm wiper flat.

Which XOMX insert fits the attached R217.69 and R220.69 cutters?

The attachment codes contain the Turbo 12 seat designation, so the matching insert platform is XOMX1204, including XOMX120408TR-M12 after complete pocket verification.

Can XOMX cutters perform ramping, slotting or plunging?

Some Turbo-style cutter bodies support these operations, but the permitted angle and cutting data depend on the exact cutter model.

Are D530, D570 and D580 original Seco grades?

No. They are compatible supplier-grade directions used on this page. Original Seco products use their own grade designations.

Pricing and Compatibility Review

Request XOMX Insert Pricing

Send the complete insert and cutter information so the pocket size, geometry, grade and clamping compatibility can be checked before quotation.

Complete XOMX insert designation or clear insert photo Turbo 06, 10, 12 or 18 cutter-pocket platform Complete R217.69, R220.69 or compatible cutter code Workpiece material, depth, radial width, overhang and coolant condition Required D530, D570 or D580 grade and order quantity

XOMX Insert

XOMX Turbo Square Shoulder Milling Inserts

Five Complete XOMX Insert Models