DCGX insert

DCGX insert angle:7° Positive rake insert with a single-sided chipbreaker；

55° rhombic turning insert;

Primary workpiece material: Aluminium;

Breaker application: Semi-finshing and finishing machining;

Matching turning tool holder: SDQCR/L, SDUCR/L;

Material : Tungsten carbide;

DCGX insert specification

G class tolerance with big rake angle, polish and ground on surface, special geometry is resistant to chip built-up on the insert edge, maximize surface finish on aluminum machining and insert tool life.

DCGX insert tool holder

DCGX insert Introduction

Understanding the DCGX Insert Code

- - D: Shape: Rhombic (diamond) with a 55-degree included angle.
  - C : Clearance Angle: 7 degrees (positive).
  - G: Tolerance: “G” indicates a medium tolerance range, though other precision tolerances may exist.
  - X : Chipbreaker style & Hole Configuration. This letter designates the specific chipbreaker geometry and whether the insert has a hole or not. Chipbreaker variations are numerous and manufacturer-specific.
- Chiffres numériques :
  - Deux premiers chiffres : Inscribed circle (IC) diameter in millimeters. To obtain the approximate inch equivalent, divide this number by 25.4.
  - Prochain Deux Chiffres : Thickness in millimeters. Divide by 25.4 to convert to inches.
  - Last Two Digits: Nose radius in millimeters. To convert to inches, divide by 25.4.

DCGX Insert Dimensions (ISO)

Désignation ISO	Cercle inscrit (CI)	Épaisseur	Rayon de l'angle
DCGX 070202	7.94mm (0.313")	2.38mm (0.094")	0.2mm (0.008")
DCGX 070204	7.94mm (0.313")	2.38mm (0.094")	0,4 mm (0,016")
DCGX 11T302	11mm (0.433")	3.18mm (0.125")	0.2mm (0.008")
DCGX 11T304	11mm (0.433")	3.18mm (0.125")	0,4 mm (0,016")
DCGX 11T308	11mm (0.433")	3.18mm (0.125")	0,8 mm (0,031")

Example: DCGX 11T308

Rhombic (diamond) shape with a 55-degree included angle.
7-degree positive clearance angle.
Tolérance moyenne.
Brise-copeaux et configuration des trous spécifiques au fabricant.
11mm inscribed circle diameter (approx. 0.43″ in inches).
3.18mm thick (approx. 0.125″ in inches).
0.8mm nose radius (approx. 0.031″ in inches).

La science derrière les plaquettes en carbure : Comment elles sont fabriquées et pourquoi elles sont si résistantes

Les plaquettes en carbure comptent parmi les outils de coupe les plus polyvalents et les plus durables qui soient. Mais comment sont-elles fabriquées ? Et qu'est-ce qui les rend si résistantes ? Dans cette vidéo, nous allons explorer la science des plaquettes en carbure, des propriétés du carbure de tungstène au processus de fabrication.