SCGX車刀

SCGX insert angle: 90° Square ,7° Positive Rake Insert with single-sided Chipbreaker；

Screw-On Inserts;

High Polish Square Turning Insert for Aluminum Applications;

Square carbide insert;

Breaker Application: Semi-finishing & Finishing machining;

Matching TurningTool Holder: SSDCN,SSKCR/L;

SCGX Insert can deal with multiple operations by combining different chip breakers and grades;

材質：碳化鎢；

SCGX insert specification

SCGX insert is the specialist in external turning. The function of a chip breaker is to improve chip control and to reduce cutting resistance.

A better balance between the two will increase the machining performance.

If chips can be broken into suitable lengths by the chip breaker, they will not wrap around the workpiece, vibration will decrease and tools will not be so easily damaged.

Chip breakers also affect cutting resistance.

Reduced cutting resistance can avoid chipping and fracturing of the cutting edge caused by vibration.

Additionally, lower cutting resistance can decrease the load and heat, and can delay the development of tool wear.

SCGX insert Meaning

Understanding the SCGX Insert Code

S: Shape: Square
C: 間隙角：7度（正）
克：公差：中等公差為標準，但也可能提供其他精度公差。
X：斷屑槽樣式 & 孔配置。該字母表示特定的斷屑槽幾何形狀以及刀片是否有孔。
數字：
- 前兩位數字： 內切圓 (IC) 直徑（以毫米為單位）。要獲得近似的英吋當量，請將此數字除以 25.4。
- 接下來的兩位數字： 厚度以毫米為單位。除以 25.4 即可轉換為英吋。
- 最後兩位數字： 圓角半徑（以毫米為單位）。要轉換為英寸，請除以 25.4。

SCGX insert holder

SCGX Insert Dimensions (ISO)

ISO 名稱	內切圓 (IC)	厚度	轉角半徑
SCGX 09T302	9.52mm (0.375")	3.18mm (0.125")	0.2mm (0.008")
SCGX 09T304	9.52mm (0.375")	3.18mm (0.125")	0.4mm (0.016")
SCGX 09T308	9.52mm (0.375")	3.18mm (0.125")	0.8mm (0.031")
SCGX 120404	12.7mm (0.5")	4.76mm (0.187")	0.4mm (0.016")
SCGX 120408	12.7mm (0.5")	4.76mm (0.187")	0.8mm (0.031")