Calculadora de la altura de la muesca de la punta esférica
Calculate theoretical scallop height from a ball nose end mill diameter and stepover or reverse-calculate stepover for a target cusp height.
Calculadora en línea
Los resultados se basan en los datos introducidos anteriormente; los valores de ejemplo son meramente ilustrativos y no constituyen recomendaciones específicas de velocidad o avance para esta herramienta.
Fórmulas y método de cálculo
h = R − sqrt(R² − (s/2)²); stepover = 2 sqrt(2Rh − h²); R = D/2.
The scallop is the ideal cusp left between adjacent tool passes on a locally flat surface cut with a full-radius ball nose. Smaller stepover generally reduces scallop height but increases the number of passes. The inverse calculation returns the centerline stepover corresponding to the requested geometric cusp height.
Supuestos y limitaciones importantes
Scallop height is not equivalent to measured Ra, and complex 3D slopes change the effective cutter geometry. Runout, deflection and path orientation affect actual results. The model assumes ideal spherical geometry and parallel stepover.
Preguntas frecuentes
Is scallop height the same as Ra?
No. Scallop height is the ideal peak-to-valley cusp between passes, not arithmetic average roughness.
Does it work on all 3D surfaces?
Use it as a starting point. Surface slope and tool contact location change effective geometry.
¿Necesita la herramienta de corte adecuada?
Adapta este cálculo al material de su pieza de trabajo, la configuración de la máquina y las dimensiones requeridas de las herramientas. Explore las herramientas de ONMY o comparte su aplicación para recibir una cotización.
Descubra las fresas de carburoSolicitar cotizaciónReferencias técnicas: Machining Doctor — Ball Nose Surface Finish. Los cálculos se realizan de manera independiente para ONMY; los enlaces a las fuentes no implican ningún respaldo.